FAP

PARTICLE FILTERS REGENERATION

Regeneration consists of periodically burning the particles accumulated on the filter.

These particles are mainly comprised of carbon and hydrocarbons.

In the presence of oxygen, filter regeneration via particle combustion takes place naturally when the exhaust gas temperature

exceeds 550°C.

This 550°C is very far from the temperatures observed in the traditional range of HDI engine used. On the one hand,

progress made on engine performance has reduced energy lost to the exhaust; on the other hand, in the city, the engine

is subject to lower thermal loads and the exhaust temperature generally varies between 150°C and 250°C.

 

ADVANTAGES :

Particle filters reduce the combustion temperature of unburnt hydrocarbon residues by accelerating the speed of carbon oxygenation, and therefore also reduces smoke emission and upkeep.

 

INSTRUCTIONS :

As a preventive measure, use the particle filters after 10,000km, then every 20,000km or once per year.

Pour 1 L of product in your tank containing at least 25 L of fuel.

Thus mixed, the cleaning agents will transform your diesel fuel into a super cleaner.

Drive normally about 30 to 35 km, then fill to the top.

Maintain an engine speed above 2,500 rpm.

 

PACKAGING

Cardboard box 12 x 1 L

Cardboard box 4 x 5 L

Barrel 30-60-210 L

 

 

D500

G.O ADDITIVE FOR THERMAL USE

The properties of transformed silicone, perfected by

ACTALYS laboratorys have led to a spectacular improvement

in the operation of diesels vehicles when added to

diesel fuel.

The silicones contained in its composition have a high

resistance to compression and high temperatures.

Their affinities on metals creates the adherence of a thin

film that is both lubricating and anti-adherent for carbon

deposits.

 

INSTRUCTIONS

100 ml for 100 litres of fuel oil.

1 L for 1500 litres fuel oil.

1 L for 1000 litres, for even better yield.

A 20 litre can treats a 33 000 litre fuel tank.

To free the injectors without dismantling the engine:

1-Unscrew the fuel oil filter bowl, empty half the contents,

and fill with D500.

2-Add 1 litre of D500 to the fuel oil tank, then return to the

normal dose of 1 litre of D500 for 1500 litres of fuel oil.

Many problems can be avoided, you will obtain better

thermal performance and fuel savings while preserving

mechanical parts.

 

PACKAGING

Cardboard box 24 x 100 ml

Cardboard box 12 x 1L

Cardboard box 4 x 5 L

Can 20 L

Barrel 30-60-210L

 

 

M600 ECO

SUPER HIGH PERFORMANCE LUBRICANT

ANTI-FRICTION FOR OIL

M600 ECO is a super lubricant with high lubrication properties and high

chemical and thermal stability.

M600 ECO is compatible with all mineral oils, detergents, and synthetic oils,as well as chlorinated hydrocarbons; only graphite oils are incompatible.

M600 ECO achieves 93% thermal and mechanical efficiency.

M600 ECO is not an additive because it does not modify the molecular

structure of oils.

M600 ECO does not pose a risk of loss of guarantee of your equipment.

Due to its molecular structure, M600 ECO cannot clog your filters.

Engine oils have a pull-out resistance of between 2 and 5 kg/mm2; with M600 ECO, pull-out resistance is 160 kg/mm2.

The thermal stability of oils is typically between 200° and 260°.

The thermal stability of oils with added M600 ECO is from -60° to +650°C.

The benefits of M600 ECO for your industrial applications.

Reduced friction coefficients on all surfaces covered in oil treated with M600 ECO. Significantly reduced power loss of your industrial equipment through significantly reduced internal friction: thermal engines, compressors, casings, power transmission components, gear boxes, couplers, tool machine, treatment of static and hydrodynamic bearings.

Stabilisation due to reduced local warming phenomena (provided there is no irreversible local damage to mechanical components). Thermal and mechanical performance obtained is in the order of 93%.

Reduced noise emission from power transmissions.

Extended life of oil through permanent elimination of aqueous compounds. Reduced maintenance costs: less wear and tear on components, less frequent oil changes.

Possible use as a super lubricant for metal cutting.

No risk of filter clogging.

 

AVANTAGES :

Why use M600 ECO when oils are increasingly more efficient?

The best oil in the world is only efficient when it is present. It has been

proven that 80% of engine wear and tear takes place during start-up.

Complete pressurisation of an oil circuit requires 3 to 5 seconds.

During this time, metal/metal contact generates abrasion. M600 ECO

provides a long-lasting local friction coefficient for parts in contact, thus

reducing wear and tear and power loss.

• M600 ECO doubles the time period between oil changes.

• Significant anti-wear and tear properties of oils to be treated, hydrofuge.

• Prevention of overheating, over revving and jamming guaranteed.

• Considerable reduction in cooling of moving parts, subject to high loads

and high pressures.

• Provides good lubrication in low and high temperatures..

 

 

PACKAGING

Cardboard box 24 x 100 ml

Cardboard box 4 x 5 L

Barrel 30-60-210L

 

 

 

DS400

DIESEL ADDITIVE

GASOLINE AND BIODIESEL

DS400 is a treatment additive that improves the performance of gasoline, diesel and biodiesel fuels.

DS400 cleans the entire fuel system in a single application,

including:

Injectors, inlet valves, collectors, injection pumps, exhaust valves, combustion chambers.

DS400 is comprised of a complex mix of molecules.

DS400 was developed from chemical technology.

It complies with French inter-union specifications EN 590 and EN228.

 

ADVANTAGES

At the recommended dosage, DS400 significantly improves the performance of fuels used in automobiles,heavy-duty vehicles, farming equipment, civil engineering equipment and boating engines. DS400 has a positiveimpact on fuel properties, with the following advantages:

Reduces the surface tension of fuel resulting in better atomisation and more efficient combustion, giving rise to significant reduction in soot and fuel consumption and thus reduced operating costs.

• Significantly reduces noxious atmospheric emissions such as carbon monoxide, particles and smoke.

• Reduces friction thus improving lubrication and preventing wear and tear.

• Has a detergent effect that cleans engines and maintains circuits in a clean state.

• Eliminates condensation, is anti-corrosive, anti-rust and reduces the risk of bacterial contamination.

• Preserves the injection and valve circuit.

• Lubricates mechanical elements.

• Reduces fuel consumption.

For faster results, put the vial of DS400 in a can and mix with the fuel, then allow the injection system to take it in directly (for a technical check for example or for exceptionally dirty engines, the result will be instantaneous). Eliminates unstable deceleration, jerking, acceleration hops, difficult start-ups and carbon deposits.

Used for all engines, this unique formula is 100% efficient for cleaning injectors, valves and combustion chambers.

DS400 provides all the advantage of fuel system cleaner with the additional benefit of an "all in 1" formula. DS400 cleans aggressively to obtain the best results by eliminating stubborn deposits using its new and unique formula for professional use; its application is accessible to all.

 

PACKAGING

Cardboard box 24 x 250 ml

Cardboard box 6 x 1 L

(dosing can)

Cardboard box 4 x 5 L

Barrel 30-60-210L